Product Feature
1. Unique split-flow design, even flow rate, removes the dead zone of flow velocity, avoids corrosion caused by dirt accumulation, and improves the utilization rate of heat exchange area of the plate.
2. Rich in plate types. It can find a plate type with high heat transfer coefficient and suitable pressure drop for any working condition, which can reduce equipment input and reduce operating cost, and achieve the lowest cost in the service life.
3. Single-side inlet and outlet pipe connection design, parallel piping for the same kind of fluid, convenient for engineering installation.
4. Gasket is connected to the edge of the plate , and is positioned neatly along the rubber pad groove. The sealing performance is high, and the dislocation is easy to be found during the installation process, can be reused, long service life and convenient disassembly and assembly.
5. The plate adopts a five-point metal positioning system, and the upper rod is three points to prevent the plate from moving up and down. The lower rod supports two points to prevent the board from moving left and right. With five-point positioning, the plate group can move without hindrance, and the gasket is sealed accurately, and the usage life is more durable.
6. Innovative plate design provides high thermal efficiency with minimum heat exchange area, and many contact points are evenly distributed between the plates, making it very strong and firm.
Product Display
-
M3
-
M6B
-
M6M
-
M10B
-
M10M
Product Model
| ALFA LAVAL model | |||||
| M3 | M15B | AM10 | M6MW | P16 | T2B |
| M6B | M15M | A10B | M10BW | P26 | T5B |
| M6M | M20M | A15B | MK15BW | P36 | T5M |
| TL6B | T20B | AM20B | M20MW | Clip6 | T8B |
| TS6M | T20P | AM20 | MA30BW | Clip8 | T8M |
| M10B | T20S | A20B | MA30S | Clip10 | T50M |
| M10M | TS20M | MX25M | MA30M | Clip15 | |
| TL10B | AK20 | MX25B | MA30 | TL15B | |
| TL10P | M30 | TL35B | AX30B | AQ80 | |