Qingdao Ruipute as a large plate heat exchanger factory in Shandong Province, the 8 major advantages of the embodiment of the plant

There are many plate heat exchanger factoriesin China with strong production capacity. Qingdao Ruiputeplate heat exchanger can stand out, relying on the other home does not have the characteristics, these characteristics are our advantage! Reflections.

1.Self-processed pressed plate, thickness 0.5mm, high heat transfer coefficient.

At the same heat transfer and temperature, the number of plates is reduced. Other pressed plates have a thickness of 0.6-0.8mm and a low heat transfer coefficient, so that at the same heat transfer and temperature, the number of plates required for the heat exchanger is reduced. The plate sheet of the more.

2.The design of the plateis unique and outstanding, that is, the conduction zone on the plate is designed in the shape of chocolate, high heat transfer efficiency, and not easy to form dead corners. The service life of the plates is up to 10 years.

Other plate manufacturers do not have this shape of plate design, heat transfer coefficient is also low, in the same working conditions, the number of plates needed more, easy to form a dead end, the service life of the plate is shorter. 3.

3. The assembly form of the plate sheet is a hybrid assembly, that is, the grain and runner of the plate sheet.

Groove depth is not the same in different conditions, and it is adapted to the form of plate runner is not the same, making a greatly improved heat transfer efficiency, the other home heat exchanger plate assembly form is relatively single, that is, in the heat exchanger within the plate of the grain and runner is the same, so the heat transfer coefficient is low.

4. In addition to conventional 304, 316 stainless steel, we also take the lead in the application of titanium, titanium palladium, hastelloy, nickel and other special materials. It is used for the manufacture of sheets.

5. The adhesive tape can be applied in various ways, mainly using the no-adhesive type, so the maintenance time is short.

If there is a fault, it can be overhauled in a very short time. Others are glued type, which takes long time to repair and delays production or heating needs.

6.The frame's finish is spray-painted, which is not easy to rust.

Other families use spray paint, which is easy to rust in the environment of high temperature and humidity in the machine room.

7. Our own production of rubber gaskets, and the world brand GislavedGummiuse the same process, compression deformation rate of 13%, we are in all the All the equipment is made of NBR rubber gasketwith temperature resistance of 180?.

8. All these details are thanks to our scientific researchlaboratory, 17 people research and development team, skilled technicians and more than 10 years of experience. The accumulated experience of selling our products in Europe and the United States, these technologies and experience are incomparable to other manufacturers, and are also our Valuable wealth.

Qingdao Ruiputeas China's large plate heat exchanger factory 8 advantages is listed above these, of course, we have other! Some advantages. However, we will continue to improve the equipment, update technology, in order to become a world-renowned large-scale plate heat exchanger manufacturers and efforts!